Self-service 30 credits / hr · Pod & Studio 4

Run the room yourself.

Everything you need to set up, record and reset our self-service podcast studios — step by step, with photos of the exact kit you'll be touching. Start by choosing your room.

01

Which studio are you in?

What to bring

Nothing is stored on Qube hardware — your footage leaves with you on your own drives.

Required A fast USB-C (Type-C) SSD

The ATEM records your video straight to this drive over USB-C, in real time. It must use a Type-C connection with a sustained write speed above 1,000 MB/s and be formatted exFAT — a slower drive can drop frames or stop recording mid-session.

Recommended An SD card

For a separate, per-mic audio backup recorded on the mixer — a safety net in case anything goes wrong with the main recording.

{{ room.loc }} Change studio

{{ room.name }}

{{ room.desc }}

Before you start

Please reset the room as you found it — it keeps the studio ready so the next member has just as good an experience as you.

If you ever arrive to find something wrong, take a quick snap and send it to content@theqube.com so we can look into it.

In this room

  • {{ item }}
    •
Studio walkthrough
{{ phase.num }}

{{ phase.label }}

{{ step.n }}

{{ step.title }}

  • {{ line }}
    •
{{ s.k }}{{ s.v }}
{{ step.title }}
{{ ex.cap }}
{{ ex.cap }}
Pro tip {{ step.note }}
Common fixes

Troubleshooting

{{ fix.q }}

{{ fix.a }}
After the session

Take your footage with you

01 · Video

Your video is on your SSD, recorded by the ATEM as a single combined program file.

02 · Audio

Your backup audio is on the SD card — each mic as its own track for flexible editing.

03 · Eject & go

Safely eject both, unplug them, and take them with you. Nothing is left behind on Qube hardware.